View DS31404_97963.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ABRIDGED DATA SHEET
19-5710; Rev 0; 12/10
DS31404 4-Input, 8-Output, Dual DPLL Timing IC with Sub-ps Output Jitter
General Description
The DS31404 is a flexible, high-performance timing IC for diverse frequency conversion and frequency synthesis applications. On each of its four input clocks and eight output clocks, the device can accept or generate nearly any frequency between 2kHz and 750MHz. The device offers two independent DPLLs to serve two independent clock-generation paths. The input clocks are divided down, fractionally scaled as needed, and continuously monitored for activity and frequency accuracy. The best input clock is selected, manually or automatically, as the reference clock for each of the two flexible, high-performance digital PLLs. Each DPLL lock to the selected reference and provides programmable bandwidth, very high resolution holdover capability, and truly hitless switching between input clocks. The digital PLLs are followed by a clock synthesis subsystem that has four fully programmable digital frequency synthesis blocks, two high-speed lowjitter APLLs, and eight output clocks, each with its own 32-bit divider and phase adjustment. The APLLs provide fractional scaling and output jitter less than 1ps RMS. For telecom systems, the DS31404 has all required features and functions to serve as a central timing function or as a line card timing IC. With a suitable oscillator the DS31404 meets the requirements of Stratum 2, 3E, 3, 4E, and 4, G.812 Types I-IV, G.813, and G.8262.
Features
Four Input Clocks
Differential or CMOS/TTL Format Any Frequency from 2kHz to 750MHz Fractional Scaling for 64B/66B and FEC Scaling (e.g., 64/66, 237/255, 238/255) or Any Other Downscaling Requirement Continuous Input Clock Quality Monitoring Automatic or Manual Clock Selection Three 2/4/8kHz Frame Sync Inputs Hitless Reference Switching on Loss of Input Automatic or Manual Phase Build-Out Holdover on Loss of All Inputs Programmable Bandwidth, 0.5mHz to 400Hz Each Can Slave to Either DPLL Produce Any 2kHz Multiple Up to 77.76MHz Per-DFS Clock Phase Adjust Output Frequencies to 750MHz High Resolution Fractional Scaling for FEC and 64B/66B (e.g., 255/237, 255/238, 66/64) or Any Other Scaling Requirement Less than 1ps RMS Output Jitter Simultaneously Produce Two Low-Jitter Rates from the Same Reference (e.g., 622.08MHz for SONET and 156.25MHz for 10GE) Nearly Any Frequency from < 1Hz to 750MHz Each Group Slaves to a DFS Clock, Any APLL Clock, or Any Input Clock (Divided and Scaled) Each Has a Differential Output (2 CML, 2 LVDS/LVPECL) and Separate CMOS/TTL Output 32-Bit Frequency Divider Per Output Two Sync Pulse Outputs: 8kHz and 2kHz Suitable Line Card IC or Timing Card IC for Stratum 2/3E/3/4E/4, SMC, SEC/EEC, or SSU Accepts and Produces Nearly Any Frequency Up to 750MHz Including 1Hz, 2kHz, 8kHz, NxDS1, NxE1, DS2/J2, DS3, E3, 2.5M, 25M, 125M, 156.25M, and Nx19.44M Up to 622.08M Internal Compensation for Local Oscillator Frequency Error SPITM Processor Interface 1.8V Operation with 3.3V I/O (5V Tolerant)
Maxim Integrated Products 1
Two High-Performance DPLLs

Four Digital Frequency Synthesizers

Two Output APLLs

Eight Output Clocks in Four Groups

Applications
Frequency Conversion Applications in a Wide Variety of Equipment Types Telecom Line Cards or Timing Cards with Any Mix of SONET/SDH, Synchronous Ethernet and/or OTN Ports in WAN Equipment Including MSPPs, Ethernet Switches, Routers, DSLAMs, and Base Stations
General Features

Ordering Information
PART DS31404GN+ TEMP RANGE -40C to +85C PIN-PACKAGE 256 CSBGA
+Denotes a lead(Pb)-free/RoHS-compliant package. SPI is a trademark of Motorola, Inc.

Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may be simultaneously available through various sales channels. For information about device errata, go to: www.maxim-ic.com/errata. For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
ABRIDGED DATA SHEET
DS31404
Application Example
clock monitoring and selection, hitless switching, holdover, frequency conversion, fractional scaling, jitter attenuation 19.44MHz, 38.88MHz, 25MHz, etc.
DS31404
system timing from master and slave timing cards line timing to master and slave timing cards
IC1 IC2
DPLL1 Path
n
OC1, OC2
clocks to line card SERDES
SONET/SDH, 1GE, 10GE, OTN, FC, etc. 3 unrelated frequencies simultaneously at <1ps rms jitter plus other frequencies at somewhat higher jitter
OC4 OC5
DPLL2 Path
n
IC3, IC4
recovered line clocks from SERDES
SONET/SDH, 1GE, 10GE, OTN, FC etc. frequencies can be unrelated to one another
8kHz, 19.44MHz, 38.88MHz, 25MHz, etc. clock monitoring and selection, undo fractional scaling, frequency conversion
155.52M, 622.08M, 25M, 125M, 156.25M, etc. with or without fractional scaling for FEC, 64B/66B, etc. MANY other rates possible, including DS1, E1, DS3, E3, 10M and Nx19.44M.
2 of 5
ABRIDGED DATA SHEET
Block Diagram
DS31404
SYNC1 SYNC2 SYNC3 PLL Bypass DFS Muxes Divider Muxes Dif Muxes
DS31404
MFSYNC
FSYNC MFSYNC
DPLL1
Filtering, Holdover, Hitless Switching, PBO, Frequency Conversion, Manual Phase Adjust
DFS 1 APLL1 DFS 3 APLL3
Divider 1
lowest jitter path
OC1 OC1POS/NEG OC3 OC3POS/NEG OC4 OC4POS/NEG OC5 OC5POS/NEG
IC1 POS/NEG IC2 POS/NEG IC3 POS/NEG IC4 POS/NEG
Input Clock Block
Frequency Scaler, Activity Monitor, Freq. Monitor, Optional Inversion (per input clock) 8
Divider 3
lowest jitter path
DPLL2
identical to DPLL1
DFS 4 DFS 5
Divider 4 Divider 5
status
Clock Selector Microprocessor Port
(SPI Serial) and HW Control and Status Pins
JTRST JTMS JTCLK JTDI JTDO
JTAG
Master Clock APLL
MCLKOSC
Local Oscillator TCXO or OCXO
3 of 5
ABRIDGED DATA SHEET
Detailed Features
Input Clock Features

DS31404
Four input clocks, differential or CMOS/TTL signal format Input clocks can be any frequency from 2kHz up to 750MHz Supported telecom frequencies include PDH, SDH, Synchronous Ethernet, OTU-1, OTU-2, OTU-3 Per-input fractional scaling (i.e., multiplying by ND where N is a 16-bit integer and D is a 32-bit integer and N < D) to undo 64B/66B and FEC scaling (e.g., 64/66, 238/255, 237/255, 236/255) Special mode allows locking to 1Hz input clocks All inputs constantly monitored by programmable activity monitors and frequency monitors Fast activity monitor can disqualify the selected reference after a few missing clock cycles Frequency measurement and frequency monitor thresholds with 0.2ppm resolution Three optional 2/4/8kHz frame-sync inputs
DPLL Features
Very high-resolution DPLL architecture Sophisticated state machine automatically transitions between free-run, locked, and holdover states Revertive or nonrevertive reference selection algorithm Programmable bandwidth from 0.5mHz to 400Hz Separately configurable acquisition bandwidth and locked bandwidth Programmable damping factor to balance lock time with peaking: 1.2, 2.5, 5, 10 or 20 Multiple phase detectors: phase/frequency and multicycle Phase/frequency locking (360 capture) or nearest edge phase locking (180 capture) Multicycle phase detection and locking (up to 8191UI) improves jitter tolerance and lock time Phase build-out in response to reference switching for true hitless switching Less than 1ns output clock phase transient during phase build-out Output phase adjustment up to 200ns in 6ps steps with respect to selected input reference High-resolution frequency and phase measurement Holdover frequency averaging over 1-second, 5.8-minute, and 93.2-minute intervals Fast detection of input clock failure and transition to holdover mode Low-jitter frame sync (8kHz) and multiframe sync (2kHz) aligned with output clocks
Digital Frequency Synthesizer Features
Four independently programmable DFS blocks Each DFS can slave to either of the DPLLs Each DFS can synthesize any 2kHz multiple up to 77.76MHz Per-DFS phase adjust (1/256UI steps) Approximately 40ps RMS output jitter
Output APLL Features
Simultaneously produce two high-frequency, low-jitter, rates from the same reference clock, e.g., 622.08MHz for SONET and156.25MHz for 10GE Standard telecom output frequencies include 622.08MHz, 155.52MHz, and 19.44MHz for SONET/SDH and 156.25MHz, 125MHz, and 25MHz for Synchronous Ethernet Very high-resolution fractional scaling (i.e., noninteger multiplication) Less than 1ps RMS output jitter
4 of 5
ABRIDGED DATA SHEET
Output Clock Features

DS31404
Eight output clock signals in four groups Output clock groups OC1 and OC3 have a very high-speed differential output (current-mode logic, 750MHz) and a separate CMOS/TTL output ( 125MHz) Output clock groups OC4 and OC5 have a high-speed differential output (LVDS/LVPECL, 312.5MHz) and a separate CMOS/TTL ouptut ( 125MHz) Supported telecom frequencies include PDH, SDH, Synchronous Ethernet, OTU-1, OTU-2, OTU-3 Internal clock muxing allows each output group to slave to its associated DFS block, either of the APLLs, or any input clock (after being divided and scaled) Outputs sourced directly from APLLs have less than 1ps RMS output jitter Outputs sourced directly from DFS blocks have approximately 40ps RMS output jitter Optional 32-bit frequency divider per output 8kHz frame sync and 2kHz multiframe sync outputs have programmable polarity and pulse width and can be disciplined by a 2kHz or 8kHz frame sync input Per-output delay adjustment Per-output enable/disable All outputs disabled during reset
General Features
SPI serial microprocessor interface Four general-purpose I/O pins Register set can be write protected Operates from a 12.8MHz, 25.6MHz, 10.24MHz, 20.48MHz, 10MHz, 20MHz, 19.44MHz, or 38.88MHz local oscillator On-chip watchdog circuit for the local oscillator Internal compensation for local oscillator frequency error
Note to readers: This document is an abridged version of the full data sheet. To request the full data sheet, go to www.maxim-ic.com/DS31404 and click on Request Full Data Sheet.
5 of 5

▲Up To Search▲

Price & Availability of DS31404

	To Download DS31404 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .